Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

repair and service manual covers Toyota Matrix and Pontiac Vibe, U.S. and Canadian models, 2003 to 2008 with an inline four-cylinder engine. The engine drives the front wheels through either a five-speed manual or a four-speed automatic transmission.

Table of Contents

Introduction: About this manual | Introduction | Vehicle identification numbers | Maintenance techniques, tools and working facilities | Buying parts | Jacking and towing | Booster battery (jump) starting | Conversion factors | Automotive chemicals and lubricants | Safety first! | Troubleshooting

download
SERVICE PROCEDURE Front Door Glass Bolt Replacement Caution: Avoid hands and face being caught by the front door glass when adjusting the height of the front door glass. 1. Adjust the front door glass to align the position of the front door glass bolt with the service hole. 2. Approximately 100 mm (4 in) from the top of the front door trim board, mark off 80 mm (3 in) with tape. 3. Adjust the front door window glass to align with the tape marking. Notice: Unhook the clip before unhooking the claw to prevent breaking the bracket garnish. 4. Remove the clip and unhook the claws to remove the front door lower frame bracket garnish. Notice: Wrap protective tape around the head of the flathead screwdriver to avoid scratching the power window switch or trim board. 5. Using a flathead screwdriver with protective tape wrapped around the head, remove the six (6) clips and claws to separate the power window switch. 6. Remove the power window switch: For LH – Unlock and remove the connector. Refer to the illustration. 2092983 – For RH (with door lock switch) – Disconnect the two (2) connectors. – For RH (without door lock switch) – Disconnect the connector. 2092928 7. Remove the screw from the door pull handle, and remove the handle. Notice: Wrap protective tape around the head of the flathead screwdriver to avoid scratching the power window switch or trim board. 8. Remove the screw. 9. Remove the front door trim board. Notice: Avoid damaging the inside handle when removing the trim board. 10. Remove the eight (8) clips and remove the trim board. Notice: Pull the service cover up carefully to avoid damaging the service cover. Notice: Do not allow butyl tape to adhere to any parts. 11. Pull up on the service hole cover until the bolt for the front door glass is visible, and then secure the cover in place with tape.

download
REMOVAL PROCEDURE 1. Loosen the positive crankcase ventilation (PCV) valve hose clamp (2). 2. Remove the PCV valve hose (3) from the PCV valve. 3. Remove the PCV valve (1) from the cylinder head. INSTALLATION PROCEDURE 1. Install the PCV valve (1) into the cylinder head. NOTE: Refer to Component Fastener Tightening Notice in Service Precautions. Tighten the PCV valve to 27 N.m (13 lb ft). 2. Connect the PCV valve hose (3) to the PCV valve (1). 3. Secure the PCV valve hose with one clamp (2).

download
This TSB supersedes TSB # 05-40-006 to include DTC descriptions in Step 10. DESCRIPTION: Incorrect operation of the transaxle solenoids may result in the following three symptoms: 1. Check Engine Light illuminated 2. Transaxle held in 3rd gear “Fail-safe” 3. Diagnostic Trouble Codes P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765 or P0770 set. NOTE: Do NOT replace the transaxle for solenoid codes listed as open/short. Instead, follow the repair procedure shown below. REPAIR PROCEDURE: 1. Using a Hi-Scan Pro, check for DTC in both the “Engine” and “Automatic Transaxle” menus. Record the DTC and description. 2. From the Hi-Scan Pro, select: ^ “Hyundai Diagnosis” menu ^ “Vehicle ^ “Auto Transaxle” menu ^ “Actuation Test”

Some 2003 model year Corolla and Matrix vehicles may exhibit M.I.L. “ON” with DTC P0770 (Shift Solenoid E Malfunction). Several production changes have occurred to correct this condition. Follow the repair procedure on pages 2 and 3 to address those vehicles that exhibit the condition. NOTE: The repair procedure must be followed closely to assure that only the affected part is replaced, as multiple possible causes are listed. S 2003 model year Corolla & Matrix vehicles produced BEFORE the Production Change Effective VINs shown below

download