download
1. Remove the powertrain control module (PCM) (2) from the battery box cover (1) and relocate to the side. 2. Release the locking tab (1) on the side of the battery box. 3. Release the alignment tabs (2) on the front of the battery box. 4. Remove the battery box lid (3). 5. Disconnect the positive and negative battery cables. Refer to [Battery Negative Cable Disconnection and Connection]. 6. Remove the battery hold down bolt (5), battery hold down (4), and washer (3). 7. Remove the battery (1). Installation Procedure 1. Position the battery (1) in the battery box (2). 2. Install the washer (3) and battery hold down (4). CAUTION: Refer to [Fastener Notice]. 3. Install the hold down bolt (5). Tightening torque Tighten the hold down bolt to 15 N.m (11 lb.ft) . 4. Install the positive and negative battery cables. Refer to [Battery Negative Cable Disconnection and Connection]. 5. Position the battery lid (3) so that the alignment tabs (2) are in position.
Related posts:
- 2004 Suzuki Verona Control Assembly Removal and Installation
- 2001 Suzuki Esteem GL Sedan Alternator: Service and Repair Removal and Installation
- 2006 Suzuki Forenza Park/ Neutral Start Switch Removal and Installation
- 2006 Suzuki Forenza L4-2.0L Stereo Cassette AM / FM Radio Removal and Installation Removal
- 1993 Suzuki Sidekick JLX TIMING BELT Removal (Esteem)
