Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
Remove fan clutch with fan impeller and fan cowl, refer to Fan Clutch, Service and Repair. Drain and dispose of coolant. See: Coolant/Service and Repair Note: The water drain plug is located on the exhaust side on cylinder 2 in the engine block. Installation: Replace sealing ring of water drain plug. Tightening torque, refer to Specifications, Mechanical. Vent cooling system and check for leaks, refer to Cooling System, Service and Repair. See: Coolant/Service and Repair Pull locks and disconnect water hoses. Installation: Refer to general instructions for work on cooling system, refer to Cooling System, Service and Repair. Loosen nut (1). Release screws on thermostat housing, remove thermostat housing. Installation: Keep sealing faces clean and free of oil. 2000 BMW 323i (E46) L6-2494cc 2.5L DOHC (M52 TU) Note: Coolant thermostat is integrated in coolant thermostat housing and can only be replaced as a single unit. Installation: Replace gasket (1).

download
Vehicle Application: 1998 BMW 528I 2.8L 2000 BMW 528IT 2.8L 2002 BMW X5 3.0L, Eng Cfg L6, Eng Des 1999 BMW 528IT 2.8L, Eng Des M52TU M54 2000 BMW 323I Sport Wagon 2.5L Customer Concern: Check engine light is illuminated in dash. Tests/Procedures: 1. Compare the actual engine temperature, as read by an infrared or contact thermometer, to the temperature shown on the scan tool. 2. If the temperatures are comparable, replace the coolant thermostat. A leaking thermostat will delay warm-up and keep the engine from coming up to proper temperature for closed loop operation. Potential Causes: Thermostat