Filed Under (volkswagen) by admin on 03-12-2015
This comprehensive repair manual contains the repair information provided by Volkswagen to their factory-trained technicians, making it an invaluable resource for the Volkswagen New Beetle (NB platform) owner. It provides clear & complete step-by-step procedures to help you understand, care for, and repair your 1998 through 2008 Volkswagen New Beetle. Wiring diagrams, component locations, campaign circulars and technical bulletins are also included in this manual.
* 1.8 Liter 4-Cyl. 5V Turbo
(engine codes: APH, AWV, AWP,BKF,BNU)
* 1.9 Liter 4-Cyl. 2V TDI
(engine codes: ALH, BEW)
* 2.0 Liter 4-Cyl. 2V
(engine codes: AEG, AVH, AZG, BDC, BEV, BGD)
* 2.5 Liter 5-Cyl. 4V
(engine codes: BPR, BPS)
Filed Under (volkswagen) by admin on 21-03-2011
Note: Removal and installation of right headlamp is illustrated. Removal and installation of left headlamp is the same. Special tools, testers and auxiliary items required 5 mm hex socket wrench Removing Insert hex wrench into headlamp lock – arrow – . Turn hex socket wrench – 1 – approximately 180 degree in direction of – arrow – (clockwise) in order to release headlamp housing from retainer. Return the headlamp lock – 1 – 90 degree as shown. Note: In order for the headlamp housing to slide in an out freely, the “U” section of the headlamp lock must be in the lowest position (90 degree ). Should the headlamp be difficult to remove from vehicle, turn hex socket wrench – 1 – alternately in both directions while pulling headlamp housing out of retainer. Note: Headlamp retainer – 1 – contains headlamp lock – 2 – position (lock-unlock). Depress lock tab – arrow – while pulling headlamp forward out of retainer. Note: The electrical connection is integrated with both the headlamp and retainer and is disconnected automatically upon removal of headlamp. CAUTION! Headlamp lock on retainer must not be turned while headlamp is removed. . Installing Install in reverse order of removal, noting the following: Note: In order for the headlamp housing to slide in an out freely, the “U” section of the headlamp lock must be in the lowest position (90 degree ). Should headlamp housing be difficult to install in vehicle, turn hex socket wrench – 1 – alternately in both directions while pushing headlamp housing into retainer.