Filed Under (Renault) by admin on 10-06-2011
Special tooling required Mot. 1732 Tool for removing and re?tting the alternator pulley Tightening torquesm the alternator decou- pling pulley I – PARTS AND CONSUMABLES FOR THE REPAIRS Parts always to be replaced: – the alternator belt, – the tensioning roller, – the mechanic tension wheel mounting bolts. II – PRECAUTIONS DURING REPAIR It is essential to replace an alternator decoupling pulley with a decoupling pulley. III – EQUIPMENT REQUIRED – Torque wrench capable of tightening a left-hand thread. IV – REMOVAL Remove the vehicle alternator (see 16A, Starting – charging, Alternator 110276 110268 Position adapter (2) from the tool kit (Mot. 1732) (corresponding to the alternator rotor recess) in the hexagon socket (1). 110267 Position the hexagon socket (1) from the tool box (Mot. 1732) in the alternator pulley. 110269 Position the adapter holder (3) in socket (2). 110270 Hold the hexagon socket (1) using an open-jawed spanner (4). Loosen the decoupling pulley (5) using a ratchet, (6) (turning it in the clockwise direction.). Remove the decoupling pulley. V – REFITTING Position: – the hexagon socket in the alternator (1), – the adapter (2) (corresponding to the alternator ro- tor mark), – the adapter holder (3) on the adapter(2). Note: Check that the torque wrench is capable of tigh- tening in an anticlockwise direction. 110266 Screw the new decoupling pulley onto the alternator rotor. Tighten to torque the alternator decoupling pulley (80 Nm) using a torque wrench(7). Refit the vehicle alternator (see 16A, Starting – charging, Alternator).