Filed Under (Cadillac) by admin on 25-08-2010
download
1. Raise and support the vehicle. 2. Remove the tire and wheel assembly. 3. Use the J 42066 and use a 1/2 inch breaker bar to counter hold the rear wheel hub. Important: DO NOT allow the drive shaft to hang freely. Suspend the drive shaft upward. 4. Remove the drive shaft bolts. 5. Remove the drive shaft from the rear wheel hub flange. 6. 7. 8. 9. Remove the brake pipe clip from the lower control arm. Remove the brake pipe from the lower control arm. Remove the rear brake caliper. Suspend the rear brake caliper. The brake system remains closed. 1. Raise and support the vehicle. 2. Remove the tire and wheel assembly. 3. Use the J 42066 and use a 1/2 inch breaker bar to counter hold the rear wheel hub. Important: DO NOT allow the drive shaft to hang freely. Suspend the drive shaft upward. 4. Remove the drive shaft bolts. 5. Remove the drive shaft from the rear wheel hub flange. 6. 7. 8. 9. Remove the brake pipe clip from the lower control arm. Remove the brake pipe from the lower control arm. Remove the rear brake caliper. Suspend the rear brake caliper. The brake system remains closed. 13. Attach the J 42094-2 and attach the J 42094-1 to the rear wheel hub flange to hold the rear wheel hub while removing the rear wheel hub nut. Use the drive shaft bolts if necessary.14. Remove the rear wheel hub nut. 15. Use the J 42094-10 as a spacer to attach the J 42094-4 to the J 42094-1 with the supplied three bolts.
