Filed Under (Vauxhall) by admin on 06-06-2011
download
Keys, doors, windows, sunroof To raise Turn the rotary switch to any position between d and e. The sunroof w ill automatic ally move to the desired position. When the rotary switch is in position e, the sunroof is fully raised. To lower Turn rotary switch to d. Posit ion memory After the ignition has been switched on, the sunroof c an be automatically returned to its last position b y briefly pressing the rotary switch. Safety function If the sunroof encounters resistance during automatic closing, it is immediately stopped and opened again, as long as the vehicle is stationary. Operated using rotary switch in the overhead control panel. To open Turn the rotary switch to any position between d and ü. The sunroof will automatically move to the desired position. When the switch is in position ü , the sunroof is fully opened . Com fort position Set rotary switch to position f. With the roof in this position, w ind noise is reduced. To close: Turn rotary switch to d. 9 Warning Closing sunroof from outside To close the sunroof from outside with the remote control: Press button p until the sunroof is closed. If the electric windows 3 are to be closed from outside the vehicle, but the sunroof is to be left op en, briefly press the rotary switch before switching off the ignition. Automatic closing 3 See page 33. If when the vehicle is being driven the sunroof encounters resistance during automatic closing, because of the higher closing forces involved the protective function cannot be guaranteed, and there is a risk of injury. If the sunroof movement is stiff, e.g. due to frost, turn rotary switch to d and keep it pressed until the sunroof is closed. Keys, doors, windows, sunroof Sunshade To reduce the sunlight in the interior with the sliding roof closed or raised. O pen or close sunshade as required. When the sunroof is opened, the sunshade is also opened. Overload If the sy stem is overloaded, the power sup ply is automatically cut off for a short time. Fault If the sunroof no longer assumes the desired position automatically , programm e sunroof electronics as follow s: 1. Switch on ignition. 2. Press the rotary switch until the sunroof is shut, then keep it pressed for a t least a further 3 seconds. 3. Turn rotary switch to ü and keep it depressed until the sunroof is open. 4. Turn rotary switch to d and keep it depressed until the sunroof is closed . 5. Turn rotary switch to e and leave there until the sunroof is fully raised. 6. Turn rotary switch to d and keep it depressed until the sunroof is closed . Electrically operated rear window blind 3 Reduces intensity of sunlight shining on to rear seats. Operation w ith ignition switched on. To raise To lower = = Do not operate blind if there are objects lying in front of the rear window. Sun blinds for rear door windows 3 To reduce sunlight a t the rear seats. Pull the blind upwards using the grip and engage it at the top in the door frame. Press N Press N again
