Filed Under (Mercedes-Benz) by admin on 21-08-2010
download
CAUTION: See brake fluid notes See notes on repairs to brake system 1 Check fluid level The fluid level must be between the “MAX.” and “MIN.” marks embossed in the brake fluid expansion reservoir (10). 2 If fluid level is too low, locate and rectify the cause Check brake disks and brake pads for wear and condition. Check brake system, ABS, ETS, ASR, ESP, SBC (also pressure reservoir, charging pump and charge plunger unit in wheelhouse) for leak tightness.
Filed Under (Mercedes-Benz) by admin on 12-05-2010
download
Traction Systems (ABS, ASR, ETS) and Speed-Sensitive Power Steering (SPS) Model 163 Diagnostic Trouble Code (DTC) Memory [12]
Preparation for DTC Readout 1. Review section [0] and [21], [22], [23] 2. Connect Hand-Held Tester (HHT) to data link connector (X11/4) according to connection diagram (see section 0). 3. Ignition: ON 4. Read out DTC memory for the ETS, ME-SFI and ETC control modules. 5. Perform nominal/actual values comparison. 6. Perform activations. 7. Follow-up and repair all displayed DTCs. 8. After successful repairs, erase all DTCs. Note: DTC readout is no longer possible using the impulse counter scan tool.
