Filed Under (BMW) by admin on 14-06-2010
download
M62 Only: Lever out expansion rivets (1). Release screws (2). Tightening torque, see 13 71 3AZ in FUEL SYSTEM – TIGHTENING TORQUES . Fig. 33: Removing Expansion Rivets Fig. 34: Removing Intake Hood By Pressing Retaining Lugs Unclip water hose (1) from holder on fan cowl. Fig. 35: Locating Water Hose M62, M54 Remove fan impeller with fan clutch. Detach plug (1) from AUC sensor. Unlock plug connection (2) and unclip cable. Fig. 36: Detaching Plug From Auc Sensor And Plug Connection
Filed Under (BMW) by admin on 13-06-2010
download
Switch off ignition. Follow instructions for disconnecting and connecting battery. See: Battery/Service and Repair Disconnect and cover battery negative lead. WARNING: Danger of scalding! Only perform these tasks on an engine that has cooled down. Remove alternator drive belt. Remove fan cowl. Drain coolant. Release bolts (1) on alternator. Release nut (1). Disconnect battery positive lead (2) from alternator. Disconnect plug (3). Release screw (4) and remove roller. Release screws (5) on alternator. Recycling A residual quantity of coolant emerges when the alternator is removed from the housing. Catch and dispose of escaping coolant. Observe country-specific waste-disposal regulations.
Filed Under (Mercedes-Benz) by admin on 10-05-2010
download
Remove bottom section of noise encapsulation. Remove belt tensioning device. Remove fan cowl and fan. Remove vacuum pump (67). Replace gasket (67). Install Assembly sleeve (067) with special tool 601 589 OS 14 00 so that engine can be turned over easily.(engines effective 09/89). Remove before installing vaccum pump. Remove Radiator (Model 201.128 only).
Remove Actuator of cruise control (Engine 603 only).
SPECIAL TOOLS
