Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
REMOVAL CAUTION: All spark plugs installed on an engine, must be of the same heat range. Spark plug CHAMPION: RC10YC4 NGK: BKR5E-11 (Alternate) NGK: BKR6E-11 (Alternate) RH SIDE 1. Disconnect the ground cable from battery. 2. Remove the resonator chamber. 3. Remove the spark plug cords by pulling boot, not the cord itself. 4. Remove the spark plugs with spark plug sockets. LH SIDE 1. Disconnect the around cable from battery. 2. Remove the two bolts which hold washer tank, and then disconnect the washer motor connector. 3. Disconnect the rear window glass washer hose from washer motor, then plug connection with a suitable cap. 4. Hang the washer tank away from working area. 5. Remove the spark plugs cord by pulling boot, not the cord itself. 6. Remove the spark plugs with spark plug sockets. INSTALLATION RH SIDE 1. Install in the reverse order of removal. Tightening torque (Spark plug): 21 No.m (2.1 kegs.m, 15.2 ft.lb) CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing. LH SIDE 1. Install in the reverse order of removal. Tightening torque (Spark plug): 21 No.m (2.1 kegs.m, 15.2 ft.lb) CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.

download
Allow the engine to cool before removing the spark plugs. Attempting to remove spark plugs from a hot engine can cause the spark plugs to seize. This can damage the cylinder head threads. Clean the spark plug recess area before removing the spark plug. Failure to do so can result in engine damage due to dirt or foreign material entering the cylinder head, or in contamination of the cylinder head threads. Contaminated threads may prevent proper seating of the new spark plug. Use only the spark plugs specified for use in the vehicle. Do not install spark plugs that are either hotter or colder than those specified for the vehicle. Installing spark plugs of another type can severely damage the engine.

download
Identifying Ignition (H4SO) Component (U5 Model) Identifying Ignition (H4SO) Component (Except For U5 Model) SPARK PLUG
REMOVAL Removing Spark Plug With Spark Plug Socket Removing Spark Plug Cords By Pulling Boot INSTALLATION
RH SIDE Install in the reverse order of Tightening torque: 21 N.m (2.1 kgf-m, 15.2 ft-lb) The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.