Filed Under (Toyota) by admin on 26-01-2011
download
OPERATION BEFORE STARTING THE ENGINE Before using the REMOTE ENGINE STARTER to start your vehicle, please be sure of the follow- ing conditions. The shift lever is in the “P” position. (Without Push Start) The key is not inserted in the key cylinder. (With Push Start) The engine can be remotely started regardless of whether the driver has a smart key remote inside or outside the vehicle. All doors are closed. The hood is closed. OPERATION REMOTE ENGINE START (vehicles without Smart Entry System) To start a non-Smart Entry vehicle remotely, press and release the LOCK button twice within two seconds, then press and hold the LOCK button for three seconds. STEP 1. Press and release the LOCK button twice within two seconds. The hazard lights will flash each time. A) Press and release the LOCK button. LOCK TWO SECONDS B) The hazard lights flash once. C) Press and D) The hazard release the lights flash LOCK button again. again. FOLLOWED IMMEDIATELY BY: STEP 2. Press and hold the LOCK button for three seconds. The hazard lights flash once when pressed, then again after three seconds. The engine starts, and the hazard lights flash for 20 seconds.
Filed Under (Lexus) by admin on 07-05-2010
download
REMOTE ENGINE STARTER OWNER’S GUIDE The REMOTE ENGINE STARTER allows you to start your engine from outside the vehicle. It utilizes your vehicle’s keyless entry remote, so there is no need to carry around an extra remote. The REMOTE ENGINE STARTER is operated the same way for vehicles equipped with or without the Smart Entry / Push Start system; simply push the remote’s LOCK button in a quick, two-step sequence. In addition, the REMOTE ENGINE STARTER can activate the heater or air conditioner according to your preset temperature controls, providing you with a comfortable cabin upon entry. As an added convenience, the REMOTE ENGINE STARTER can also activate the defroster (when preset) to clear up the windshield during cold weather.
Filed Under (Toyota) by admin on 15-04-2010
download
1. Vehicle Disassembly. (a) Remove the negative battery cable. (Fig. 1-1) (1) Protect the fender before starting. (2) Do not touch the positive terminal withany tool removing the cable. (b) Remove the glove box under-dash cover. (Fig. 1-2) (c) Remove the passenger’s step cover. (Fig. 1-3) Fig. 1-1 10mm Wrench Negative Battery Cable Battery Step Cover Fig. 1-3 Nylon Panel Removal Tool Fig. 1-2 Under-Dash Cover Nylon Panel Removal Tool Page 3 TOYOTA AVALON 2005 – TVIP V4 (REMOTE ENGINE STARTER) Procedure Page 3 of 33 pages Issue: C 02/02/05 (d) Remove the passenger’s cowl cover. (Fig. 1-4) (1) Remove one nut securing the cowl cover. (e) Remove one screw and one bolt from the glove box assembly. (Fig. 1-5) (f) Remove the glove box assembly. (Fig. 1-6) (1) Open the glove box door and remove three screws securing the glove box assembly. (2) Disconnect the trunk opener cancel switch from the glove box assembly ifequipped. For vehicles with Smart Entry, the disassembly process ends on Step f. Go to Section 5. For vehicles without Smart Entry, continue the disassembly process
