Filed Under (Renault) by admin on 09-06-2010
download
Battery – Battery + Door function control module, driver Door function control module, passenger Door mirror adjustment motor, driver Door mirror adjustment motor, passenger Door mirror adjustment switch Earth point location 10 Earth point location 4 Earth point location 5 Earth point location 9 Electric window motor, driver Electric window motor, passenger Electric window switch, driver’s door Electric window switch, passenger door Fuse Fuse box/relay plate, engine bay Fuse box/relay plate, fascia 1 Ignition main circuits relay Ignition switch – ignition ON Multifunction control module Shorting link connector NOTE: In certain diagrams (Citroen, Peugeot & Renault), colour codes are replaced by numbers which are used to identify a particular cable and not the colour. In this instance, the cables will be numbered at each end close to the harness connector.
Filed Under (Renault) by admin on 12-04-2010
download
Tools you need: • Torx T-20 • Socket wrench size M10 • Small screwdriver • Chalk or pencil (if you want to put some marks on the bodykit to fix it exactly as it was) • A bucket to store the washer fluid (remember: it might be upto 6.5 liters!) • Old soft blankets, wood blocks or a friend to lend a helping hand to avoid scratches to the bumper pain Removing the bumper • Open the bonnet and you will see first it is necessary to remove the front plastic grill. Remove the front grill by removing the black plastic clips inside the engine bay. Show below left. Do this by turning them ? turn left and then lift up by the centre If you have fog lamps you can disconnect the wires. If you have Xenon lamps you have a headlight cleaning unit, disconnect the hose from the bumper, have the bucket close to hand to catch the washer fluid as it empties. • Now the bumper should be successfully be removed
