Filed Under (Uncategorized) by admin on 18-05-2010
download
Setting of limit switch If any of the following work has been done, set the limit switch (integrated in the motor). Removal and installation of the motor from the regulator. Operate the regulators as a unit. Installation of the new glass. Installation of the new glass run. Zoom Sized for Print Resetting After installing each component to the vehicle, follow the steps below. 1. Raise the grass to the top dead center. 2. While pressing and holding the reset switch, lower the glass to the bottom dead center. 3. Release the reset switch, and check the reset switch returns to the original position, and then raise the glass to the top dead center. CAUTION: Do not operate the glass automatically to raise the glass to the top dead center.
Filed Under (Toyota) by admin on 22-04-2010
download
DESCRIPTION & OPERATION TIRE PRESSURE MONITOR (TPM) SYSTEM The tire pressure warning system informs the driver if it detects a low tire pressure. When the tire pressure warning system detects low tire pressure in any of the 4 wheels which affects safe driving, the tire pressure warning light comes on. Tire pressure warning system is controlled by the Brake Actuator Assembly (skid control ECU). When the tire pressure reset switch is pushed, the tire pressure warning light goes off. See Fig. 1 . RESET PROCEDURES
NOTE:
This system requires initializing after changing tires or wheels, after rotating the tires, or when tire pressure warning light blinks twice every second. Set tire pressure within the specified range before initializing. If the tire air
