Filed Under (Ford) by admin on 07-09-2010
download
FORD: 2000-2004 Mustang 2000-2005 Crown Victoria, Taurus 2000-2003 Explorer Sport, Windstar 2000-2004 Ranger 2000-2005 E-Series, Excursion, Expedition, Explorer, F-150, F-Super Duty 2001-2005 Escape, Explorer Sport Trac 2004-2005 Freestar 2005 Escape Hybrid 2004-2005 F-650, F-750 LINCOLN: 2000-2002 Continental 2000-2005 LS, Town Car, Navigator 2003-2005 Aviator MERCURY: 2000-2005 Grand Marquis, Sable, Mountaineer 2004-2005 Monterey 2005 Mariner ISSUE A service kit is now available to improve safety belt retraction speed. ACTION See the part application chart and select the appropriate kit. Follow the Instruction Sheet included in the kit. Refer to Workshop Manual Section 501-20a for additional information. NOTE IF TEFLON TAPE IS ALREADY PRESENT ON THE SAFETY BELT GUIDE RING (D-RING), DO NOT CONTINUE WITH THIS TSB. NOTE EACH KIT SERVICES TWO (2) BELTS. NOTE DOES NOT APPLY TO AVIATOR/EXPLORER 4DR/MOUNTAINEER FRONT SAFETY BELTS FOR VEHICLES BUILT AFTER 6/25/2004, OR REAR SAFETY BELTS FOR VEHICLES BUILT AFTER 10/22/2004, BECAUSE TEFLON TAPE IS INSTALLED DURING PRODUCTION.
Filed Under (Lincoln) by admin on 16-05-2010
download
Some 2003-2004 Lincoln Navigator retractable running boards may exhibit false reversal, partial deployment or retraction and/or jerky/noisy operation. This may be due to mechanical binding or damage to running board deployment mechanisms. ACTION Verify there are no hidden debris in the running board tracks that may cause the condition. Clean the running board tracks with a high pressure washer if available and test the system again. If the condition is not corrected follow normal Workshop Manual diagnostics. If the condition continues refer to the Service Procedure for
component testing and replacement.
Filed Under (Mercedes-Benz) by admin on 14-05-2010
download
Seat Belt Does Not Roll Up Correctly
If you receive customer reports in the above model vehicles of the front or rear seat belts not rolling up fully, the cause could be dirt deposits on the seat belt guide due to a soiled seat belt. Cleaning the belt guide and seat belt should restore proper function of the seat belt retraction. To resolve, perform the following.1. Clean the belt guide using MB Interior Care (Figures 1 and 2).
2. Clean the seat belts using MB Car Shampoo mixed with water, MB Textile Carpet/Fabric Care or clean, lukewarm water and soap. Do not treat the belt with any other cleaning agents. 3. Extend belt and allow to air dry. Do not dry at temperatures above 175 degrees F (80 degrees C) or in direct sunlight. Do not bleach or dye.
