Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
1. Make sure the front wheels are in the straight-ahead position. 2. WARNING: To avoid the risk of serious personal injury, read and follow all warnings, notes and instructions in the deactivation procedure. Deactivate the supplemental restraint system (SRS). For additional information, refer to Section 501-20B. 3. Connect the battery ground cable. 4. Position the front seats rearward. 5. Disconnect the battery ground cable. 6. Through the glove compartment opening, remove the instrument panel support brace bolt. 7. Disconnect the aspirator hose from the housing. 8. Disconnect the RH bulkhead connector. 1. Loosen the bolt. 2. Disconnect the RH bulkhead connector. 9. Close the glove compartment door. 10. Remove the RH lower instrument panel insulator. 1. Disconnect the power point electrical connector. 2. Remove the courtesy lamp from the lamp socket. 3. Remove the RH lower instrument panel insulator. 11. Remove the tunnel brace trim cover. 12. Remove the instrument panel tunnel brace. 1. Remove the nuts. 2. Remove the brace. 13. Position the steering column brace aside. 1. Remove the nut. 2. Position the steering column brace aside. 14. Separate the intermediate shaft from the steering column shaft. 1. Remove and discard the pinch bolt. 2. Separate the intermediate shaft from the steering column shaft. 15. Position the RH and LH cowl side trim panels aside. Position the RH and LH front door weatherstrips aside. 16. Remove the RH and LH A-pillar trim panels.

download
Cougar 16 pin CAN1 / CAN2 Under Dash panel centre To 1995 Cougar 16 pin CAN1 / CAN2 Near driver side door, just above From 1995
pedals. Escort/Orion 3 pin 2/3/4 pin to 16 pin Engine compartment rear LH side. To 1995 (A903061-3) Escort/Orion 2 pin 2/3/4 pin to 16 pin Engine compartment rear LH side. To 1997 (A903061-3) Escort/Orion 16 pin CAN1 / CAN2 Engine compartment rear LH side.
1994 to 1997 Escort/Orion 16 pin CAN1 / CAN2 LH A-pillar (RHD), RH A-pillar 1996 on (LHD). Fiesta/Courier 3 pin 2/3/4 pin to 16 pin Engine compartment. To 1995 (A903061-3) Fiesta/Courier 2 pin 2/3/4 pin to 16 pin Engine compartment. To 1995 (A903061-3)
Fiesta/Courier 16 pin CAN1 / CAN2 LH A-pillar. To 1996 Focus 16 pin CAN1 / CAN2 Under dash panel.

download
1. Front door finisher cap 2. Front door grip cap (LH) 3. Power window switch finisher LH 4. Front door 5. Front door inside Front door grip 7. Front door panel 8. Power window switch finisher RH : : : Metal clip
FRONT DOOR FINISHER : Removal and Installation Disconnect power window switch connector, and then remove power window switch finisher. 8. Insert remover tool (A) between door finisher and door panel to
disengage door finisher mounting clips, starting from the bottom
and working to the top.

download
REMOVAL AND INSTALLATION Exterior Mirrors — Exploded View Printable View (364 KB) Aero-Style Mirror
NOTE: LH exterior mirror shown, RH exterior mirror similar. 14631 Exterior mirror electrical connector W705760 Exterior mirror nut (3 required) 17K707 Exterior mirror glass — Dampener springs (part of 17K707) Exterior mirror motor screw (3 required) (part of 17D696)
17D696 Exterior mirror motor — Exterior mirror lower cover screw (3 required) (part of 17682 RH/ 17683 LH) — Exterior mirror lower cover (part of 17682 RH/ 17683 LH) 17D742 RH/ 17D743 LH Exterior mirror upper 17682 RH/ 17683 Exterior mirror

download
REMOVAL AND INSTALLATION Item Part Number Description Item Part Number Description 4 17508A Wiper pivot arm linkage 1
W707014-S441 Wiper pivot arm nut assembly (includes wiper 2 17526 Wiper pivot arm (LH and motor) RH) 5 — Wiper motor crank bolt
3 N807391 Wiper pivot arm linkage bolt ( (3 required)