Filed Under (Toyota) by admin on 06-07-2010
Tags: alignments,
component replacement,
ecu,
highlander,
monitor system,
rav4,
scion,
scion tc,
suspension component,
tire pressure,
tire replacement,
tire rotation,
tire sizes,
toyota sienna,
warning system
download
Models ‘04 – ‘05 Highlander, RAV4, Sienna, & Solara, ‘05 Scion tC This service bulletin provides the proper procedures for normal maintenance re- initialization of the indirect Tire Pressure Warning System (TPWS). When performing service that requires tire rotation or tire replacement, suspension component replacement or alignments, the Tire Pressure Warning System must be re-initialized. During initialization, the Tire Pressure Warning System, located within the ABS or Skid Control ECU, learns the tire sizes from rotational speeds and resonance frequencies.
Filed Under (Plymouth) by admin on 29-05-2010
download
WHEEL BEARING Wheel bearings do not require periodic maintenance and lubrication. To inspect, raise vehicle and remove wheel and brake drum. Rotate hub assembly. Excessive roughness or resistance may indicate bearing failure. Minor grease loss from bearing is considered normal. REMOVAL & INSTALLATION NOTE: If a suspension component fails or becomes bent or damaged, DO NOT straighten or repair. Always replace with a NEW component. COIL SPRING CAUTION: Only frame contact hoisting equipment may be used on vehicle. Damage will occur if vehicle is lifted by rear axle or rear suspension components.
