2004 Dodge Intrepid INTAKE MANIFOLD UPPER REMOVAL

0

Filed Under (Dodge) by admin on 07-09-2010

download
REMOVAL- UPPER 1. Disconnect negative cable from battery remote jumper terminal. 2. Disconnect Inlet Air Temperature (IAT) Sensor connector. Remove air inlet resonator and inlet tube. 3. Remove throttle cable and speed control cable from throttle arm and bracket. 4. Remove throttle cable bracket. 5. Disconnect electrical connectors from the following components: – Manifold Absolute Pressure (MAP) Sensor – Throttle Position Sensor (TPS) Sensor – Idle Air Control (IAC) Motor 6. Disconnect Vapor Purge hose, Brake Booster hose, Speed Control Servo, Positive Crankcase Ventilation (PCV) hose (Fig. 104). 7. Loosen upper fastener at throttle body support bracket 9. Remove upper manifold (Fig. 105). 10. Inspect manifold. INSPECTION Check manifold for: – Damage and cracks – Gasket surface damage or warpage – Damaged or clogged EGR ports

Related entry:

2004 Dodge Intrepid upper intake manifold installing Diagram,