Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
1) System overview: The Renault tyre pressure monitoring system comprises of 4 tyre pressure transmitters (1 on each valve), a central RF receiver and a control unit (ECU). The purpose of the system is to constantly monitor the individual tyre pressures and inform the driver of any faults within the system via the LCD dash display. Front Right Front Left Each valve emits an RF signal which carries its individual identification number (7 or 8 digit) and the measured tyre pressure. This signal will be emitted every hour when the vehicle is stationary, when the wheel is rotating at 20kmh+ or when there is a rapid loss of pressure. The valves are identified by a coloured ring fitted to the collar. Front Left – Green Front Right – Yellow Rear Left – Red Rear Right – Black 2) Tyre sets

download
Each valve sensor has a unique code and is matched to a particular wheel. This is programmed into the UCH control module. This enables a faulty wheel to be identified (given that the receiver can identify which wheel is transmitting). The sensor emits an RF (Radio Frequency) signal containing the valve code, status and tyre pressure. If wheels are to be swapped around then reprogramming will need to be carried out to identify the new position of the wheel. Each valve sensor has a coloured ring attached to the valve nut, each colour corresponds to a particular wheel position:

download
Engine Change engine oil and oil filter Check and replenish engine coolant Check engine compartment for leaks and damage (visual check) Check condition and tension of driving belts Check air filter Check spark plugs Check components in engine compartment: Visual check for leaks (e.g. fuel, coolant, oil) and damage Engine management system diagnosis using VAS diagnostic tester
Transmission System Check transmisson fluid Check swivel ¡oints and boots for leaks and damage Check transmission system, differential and drive shaft bellows for leaks and damage Brake System Check brake fluid Brake system: Perform visual check for leaks and damage Front and rear brake pads/linings: Check thickness Check brake discs/drums Check, clean and adjust brakes, including parking brake (if applicable) ABS/ESP, electronic parking brake system: Diagnosis using VAS tester (if applicable)
Steering System Check steering system for leaks and damage (if applicable) Track rod ends: Check play, security and boots

Check steering knuckle ball joint protection boots for leaks and damage Ol Electrical System • Check battery condition using VAS battery tester • Windscreen wash/wipe system and headlight washer system: Check function,
adjustment and for damage • Check windscreen wiper blades for damage • Windscreen wash/wiper system: Check fluid level and replenish if necessary • Check electrical systems such as exterior lighting system, interior compartment
electrics (Interior lighting, horn, cigarette lighter, window operator, etc.) • Reset service interval display

• Air conditioning system: Diagnosis using VAS tester • Check immobilization system SI Tyres • Tyre pressure of all 4 wheels and spare wheel: Check and adjust • Check tyre tread depth• Check tyre wear and condition • Tyre rotation, if necessary Miscellaneous Check exhaust system: Visual check for leaks, security and damage Check door arrester, sunroof, hinges (door, hood, trunk), grease if necessary Underbody: Visual check for damage to underbody sealant, underbody panels,
routing of lines, plugs Road tes