Auto Repair Manual Free Download and ReviewsFree download ebook pdf files automotive manual

download
ON?VEHICLE INSPECTION 1. INSPECT INJECTOR OPERATION Check operation sound from each injector. (a) With the engine running or cranking, use a sound scope to check that there is normal operating noise in proportion to engine rpm. (b) If you have no sound scope, you can check the injector transmission operation with your finger. If no sound or unusual sound is heard, check the wiring connector, injector or injection signal from the ECU. 2. INSPECT INJECTOR RESISTANCE (a) Disconnect the injector connector. (b) Using an ohmmeter, measure the resistance between the terminals. Resistance: Approx. 13.8W If the resistance is not as specified, replace the injector. (c) Reconnect the injector connector.

download
Some 2005 – 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.I.L. “ON” with DTC P2716 stored. Improvements have been made to the Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) to reduce the possibility of this condition occurring. Use the following procedure to repair the vehicle. Inspection
If the vehicle is currently exhibiting a harsh shift condition and M.I.L. “ON” with DTC Procedure P2716 stored, refer to the Technical Information System (TIS) and follow the procedures below. S 2005 model year Corolla Repair Manual, Drivetrain – Automatic
Transmission/Transaxle – “Electronic Controlled Automatic Transaxle [ECT]: P2716
Pressure Control Solenoid ‘D’ Electrical”