download
REMOVAL 1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM HINT : At the time of installation, please refer to the following item. Evacuate air from refrigeration system. Charge system with refrigerant and inspect for leakage of refrigerant. Specified amount: 600 ±50 g (21.16 ±1.76 oz.) 2. DISCONNECT LIQUID TUBE 5VZ-FE Shown a. Using SST, remove the piping clamp. SST 09870-00025 (Liquid tube) 1. Insert SST to piping clamp. HINT : Confirm the direction of the piping clamp claw and SST using the illustration showing on the caution label. 2. Push down SST and release the clamp lock. NOTE: Be careful not to deform the tubes, when pushing SST. 3. Pull SST slightly and push the release lever, then remove the piping clamp with SST. 4. Remove the piping clamp from SST. b. Disconnect the both tubes.
Related posts:
- 1994 Toyota Truck Previa Van 2WD Heating and Air Conditioning Evaporator Case Service and Repair
- 1995 Toyota 4 Runner Evaporator Case Removal and Installation
- 1994 Toyota Truck Previa Van AIR CONDITIONING UNIT REMOVAL
- 2002 Toyota Tundra Access Cab SR5 Timing Belt: Service and Repair
- 2002 Toyota Tundra Access Cab SR5 Valve Clearance: Adjustments INSPECTION
