download
a. Remove the ignition coils (with igniter). b. Using a 16 mm plug wrench, remove the spark plugs. c. Clean the spark plugs. If the electrode has traces of wet carbon, allow it to dry and then clean with a spark plug cleaner. Air pressure: Below 588 kPa (6 kgf/sq.cm, 85 psi) Duration: 20 seconds or less HINT: If there are traces of oil, remove it with gasoline before using the spark plug cleaner. d. Check the spark plug for thread damage and insulator damage. If abnormal, replace the spark plug. e. Adjust the spark plug electrode gap. Electrode gap: 0.8 mm (0.031 in.) f. Using a 16 mm plug wrench, install the spark plugs. Torque: 17.5 N.m (180 kgf.cm, 13 ft.lbf) g. Reinstall the ignition coils (with igniter).
Related posts:
- 2002 Toyota Tundra Access Cab SR5 Valve Clearance: Adjustments INSPECTION
- 1988 Toyota Tercel Sedan Fuel-Cut Solenoid: Testing and Inspection
- 2003 TOYOTA TACOMA REMOVE CAMSHAFT POSITION SENSOR
- BLITZ COMPRESSOR SYSTEM Instruction Manual Toyota Yaris 2006-up models 5speed and Automatic
- 2007 TOYOTA TUNDRA CAMERA KIT INSTALLATION
