2005 Toyota Tacoma WIPER RUBBER LH REPLACEMENT

0

Filed Under (Toyota) by admin on 30-07-2010

download
1. REMOVE FR WIPER BLADE LH a. Raise the front wiper blade to the position as shown in the illustration. b. Disengage the claw and remove the front wiper blade LH from the front wiper arm LH. NOTE: Do not bend the front wiper arm with the front wiper blade LH removed, as the arm tip could damage the windshield surface. 2. REMOVE WIPER RUBBER LH a. Remove the front wiper rubber LH from the front wiper blade. b. Remove the 2 wiper rubber backing plates from the wiper rubber LH. 3. INSTALL WIPER RUBBER LH a. Install the 2 wiper rubber backing plates onto the wiper rubber LH. NOTE: Be sure to install the wiper rubber backing plates in the correct direction. b. Install the wiper rubber LH so that the head part (Larger side) of the wiper rubber faces the arm axle side. NOTE: Push the front wiper blade into the grooves of the wiper rubber to engage them completely.

Related entry:

picture of 91 dodge van b350 winshield wiper motor assembly, where is the pulse board located in 2007 yukon, chevrolet hhr wiper arm install, 1996 dodge dakato wiper linkage diagram, 1996 dodge dakota wiper assembly, toyota rav4 back glass rubber, show how to use controls for 2007 crv front windshield wiper controls for, 1989 k 1500 wiper problem, how to repair intermitten wiper on 2001 dodge dakota, how to remove rear wiper motor on audi a6 avant 2001,

  2005 Toyota Tacoma WIPER RUBBER LH REPLACEMENT Direct Download speed 4887 Kb/s

  2005 Toyota Tacoma WIPER RUBBER LH REPLACEMENT Full Version speed 5767 Kb/s

Comments are closed.