download
Some customers may hear a clunk, pop, or knock type noise when turning the steering wheel left or right. Use the following procedure to lubricate the intermediate shaft and address customer concerns
Prior to removing the steering intermediate shaft, install a steering wheel holder to ensure that the steering wheel and front wheels remain stationary. Once the intermediate shaft is removed, do NOT allow the steering wheel to spin freely. 1. Disconnect the steering intermediate shaft sub-assembly.A. Loosen the bolt and remove the clamp from the steering column boot. B. Separate the steering column hole cover from the boot. Figure 1. 1 Bolt C. Place matchmarks on the steering intermediate shaft sub-assembly and steering gear assembly. Figure 2. 1 Matchmarks D. Remove the bolt and disconnect the steering intermediate shaft sub-assembly
Related posts:
- STEERING INTERMEDIATE SHAFT NOISE 03 – 06 Camry, 04 – 05 Highlander, & 04 – 06 Solara,
- 2009–2010 Toyota Corolla, Matrix Steering Intermediate Shaft Knocking Noise
- 2005 Toyota Tundra REMOVAL REMOVE PROPELLER SHAFT
- HEATER PERFORMANCE IMPROVEMENT 2003 – 2005 model year Corolla
- 1997 Toyota Camry LE Sedan 4-Door Steering Gear: Service and Repair Installation
