download
Remove components Caution! Remove the ignition key from the ignition switch before beginning Note! work. Crankshaft or camshaft must not be rotated under any circumstances more than is listed below. Failure to follow these instructions may cause damage to the valves. upper timing belt cover. servo reservoir and expansion tank. Lift up and place on top of engine. Note! Take care not to spill servo oil from the bleed hole in the cap. Place paper wipe around the reservoir and then cover with a plastic bag as protection. Spilled servo oil is highly inflammable. auxiliaries belt. front camshaft belt cover. Position engine according to marking Raise the car. Remove right front wheel. Remove the nut for the cover in the fender liner. Install the upper camshaft belt cover. Turn crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond. Turn the crankshaft a further 1/4 turn clockwise and then back again until the markings correspond. The markings are illustrated. Remove upper camshaft belt cover.
Related posts:
- 1992 Volvo 740 Timing Belt INITIAL CHECKS (PRIOR TO REMOVAL)
- 2006 Volvo S80 Bi-Xenon Lamps Replacing
- 2002 Volvo S60 Replacing The Steering Column Covers
- 1994 Volvo 940 Compressor Clutch: Service and Repair Clutch, Belt Pulley, Bearing, Electromagnet – Replacement
- MAINTENANCE INFORMATION 1995 Volvo 850
