download
Boot, half shaft, replacing Special tools: 951 2619, 999 2412 Disassembly Note: Preparatory work, see Axle Shaft Assembly; Service and Repair. Remove the boot Secure the drive shaft in a vise with soft jaws. Remove the clamps from the boots. Cut the boot and remove it from the shaft. Check the measurement Wipe off the grease from the constant velocity joint housing. Measure the distance from the inner ring to the inner groove on the shaft. Note the measurement. Tap off the constant velocity joint housing Use a brass drift. Note: Only tap the inner ring. Take care not to damage the ball holder or outer ring. For cleaning/assembly and greasing the outer joint, see below
Related posts:
- 2003 Volvo XC90 Brake Pad: Service and Repair Rear Brake Pads Replacing
- 1994 Volvo 940 Compressor Clutch: Service and Repair Clutch, Belt Pulley, Bearing, Electromagnet – Replacement
- 2002 Volvo XC70 Rear Wheel Hub Replacing
- 2004 Volvo XC90 Removing the center console
- 1999 Volvo V70 XC WHEEL HUB UNIT Removal
